Blind Winder
Blind chain winder
One crank and the loose chain winds up out of reach of kids and pets.
Fits standard bead chains. Not for braided-cord blinds.
20% off per unit when you buy 2 or more.
Secure checkout by Stripe · Printed to order in the UK
Something went wrong starting checkout. Please try again, or email info@storeyourstuff.xyz.
Fitted in under a minute
Stick the plate to the wall
Press the 140mm back plate onto a clean, flat patch of wall near the blind. No drilling, screws or tools.
Loop the chain on
Take the loose blind chain and loop it around the winder's wheel.
Turn the crank
A few turns winds the chain up onto the wheel, off the floor and out of reach.
Use it straight away
No waiting for adhesive to cure. Every day after, it's one crank turn to tidy the chain away.
See it turn
Winder vs a cord clip or cleat
| Blind chain winder | Cord clip / cleat | |
|---|---|---|
| How it works | Winds the loose chain up onto a wheel, off the floor | Holds a loop of cord against the wall |
| Chain after use | Fully taken up — no dangling loop left within reach | Still a loop within reach unless wrapped by hand every time |
| Fitting | Sticks to the wall — no drilling | Usually screwed in, or needs the cord re-looped each time |
| Everyday use | One crank, done — no re-threading | Cord has to be wound and tucked in by hand each time |
Child safety FAQ
Are blind cords actually dangerous?
Yes — a dangling loop of blind cord or chain is a recognised strangulation hazard for young children and pets, which is why UK and EU regulations require new blinds to be sold with a safety device. The risk comes from a loop hanging within reach, not from the cord itself, so taking the loop out of reach removes the hazard.
How is a winder safer than a cord clip or cleat?
A cleat only helps if someone remembers to wind the cord and hook it on every single time — miss it once and the loop is hanging free again. The winder takes the chain up onto the wheel as you crank it, so there's no loop left to forget about.
Is this a substitute for cordless blinds?
Cordless blinds remove the cord entirely and are the safest option if you're replacing blinds anyway. The winder is for the far more common case: you already have a corded blind and don't want to replace it, but want the loose chain out of reach in seconds.
Does it work with any blind?
It's made to fit standard bead chains, which cover the large majority of roller and vertical blinds. If you're not sure your chain will fit, email us a photo before ordering.
Is it safe to mount without drilling?
Yes — the back plate sticks with strong mounting tape (3M VHB or similar), which holds well for everyday cranking. If you'd rather have a permanent fit, the same plate has 12 screw holes.
Is it 3D printed?
Yes — 3D printed to order in the UK, in durable PETG or PLA. The wheel and hand-crank knob are a single moving part with no springs or clips to wear out.